Thermador has been building premium kitchen appliances since 1916 and effectively invented the built-in wall oven. Kodiak services the electric side of the Thermador range in Edmonton — wall ovens, induction cooktops and Sapphire dishwashers. Gas cooking equipment we refer out.
We'll get back to you and confirm your spot on the list.
Thermador was founded in 1916, and its list of firsts is genuinely unusual. In 1932 it became the first company in the US market to produce built-in ovens. In 1947 it became the first US company to sell home appliances made of stainless steel, launching the first built-in wall oven together with a matching built-in cooktop — the layout nearly every premium kitchen now takes for granted.
BSH acquired the brand in 1998, which is why Thermador shares engineering DNA with Bosch and Gaggenau. The modern range keeps the same instinct for firsts: the Freedom Induction Cooktop was the first full-surface induction appliance, and the Sapphire and Star Sapphire dishwashers arrived with the Radiance Collection in 2018.
Where Thermador Sits Today
Thermador is BSH’s North American luxury line, sharing engineering approaches with Bosch while targeting a higher tier. The Freedom Induction Cooktop was the first full-surface induction appliance, meaning cookware can be placed anywhere on the surface rather than on fixed rings. The Sapphire dishwasher line, introduced in the 2018 Radiance Collection, includes custom panel-ready models with push-to-open handleless designs.
Honest note from Kodiak: Everything on this page covers electric Thermador equipment. Thermador also builds gas ranges and rangetops, and Kodiak doesn’t service gas — we hold no gas-fitter certification. If your Thermador cooking appliance is gas, tell us when you get in touch and we’ll point you to a gas-certified shop instead of using up your service call.
Our Edmonton technicians know the Thermador platform. We aim to stock the most common parts so most repairs can be done in a single visit.
Electric elements fail visibly — a break or a burn-through in the coil. The oven runs but never reaches temperature, or heats unevenly. Straightforward once confirmed, and confirming takes a meter and a minute.
Induction needs ferrous cookware and a working coil beneath it. When one zone stops recognising a pan that works elsewhere on the surface, that points at the coil or its control — not at your pan.
A drifting sensor tells the control board the wrong temperature, so the oven runs hot or cold while insisting it’s correct. Baking results go off before anything looks broken. Inexpensive part, commonly misdiagnosed as a board fault.
On a premium dishwasher the usual suspects still apply — filter, spray arm jets, water arriving too cool, scale from hard water. Worth ruling those out before anyone discusses a pump.
Wall ovens will refuse to operate if the door latch doesn’t confirm closed, and heavy premium doors put real load on hinges over years. A door that no longer sits square is both a heat-loss problem and a control problem.
Unresponsive panels or erratic behaviour can be the board, but frequently it’s a sensor or a connection feeding it bad information. Boards are among the pricier parts here, which is exactly why they should be tested rather than assumed.
Washers, dryers, fridges, dishwashers, stoves, freezers, and over-the-range microwaves — we fix them all.
You get a firm labor quote before we start. Parts shown separately on your invoice.
How it works: Labour is our flat rate, quoted before we start. Parts are quoted separately. Some parts take longer to source; we'll always tell you upfront.
Electric equipment only: this page covers Thermador wall ovens, induction cooktops, dishwashers and refrigeration. Kodiak doesn’t service gas ranges or rangetops — we hold no gas-fitter certification, and we’d rather say so here than at your door. On parts: Thermador components are priced above mass-market equivalents and are quoted separately, with labour flat-rate in the range above.
We know every Edmonton neighbourhood. No call centre — just a local team that shows up when they say they will.
Every Kodiak job comes with liability insurance and a parts-and-labour warranty. Your home is protected — and so is the repair.
We quote labor as a flat rate before we start. Parts shown separately — no hidden fees, no hourly clock running while we work.
No. Kodiak services electric appliances only — we don’t hold gas-fitter certification. Tell us the appliance is gas when you make contact and we’ll refer you to a gas-certified shop rather than charge you a service call to say the same thing at your door.
Yes. Induction cooktops have individual coils, control boards, sensors and cooling fans, and each can be tested and replaced. A single dead zone is usually a contained repair rather than a whole-cooktop replacement.
Same parent — BSH acquired Thermador in 1998 — but they’re distinct lines. There’s shared engineering thinking, which helps with diagnosis, but Thermador is positioned as the luxury tier and its parts are priced accordingly.
Most often a failing element, a drifting temperature sensor, or a convection fan that isn’t moving air properly. Those are three different repairs at three different prices, so it’s worth testing rather than guessing.
Higher than mass-market brands, yes. We quote parts separately on the invoice so you see the number before anything is ordered, and labour stays flat-rate regardless.
Yes, the electric refrigeration line. Same approach as any built-in unit — careful around cabinetry, and a real diagnosis before any parts conversation.
Fill out the form and we'll get back to you to confirm your spot.