Wall oven repair problems we solve
With a wall oven, getting to the part is most of the job. It comes out of the cabinet on its own weight, and on a double that's twice the machine in the same opening.
Oven won't heat
Element, thermal fuse, sensor or board. On a double, tell us which cavity — upper and lower have their own parts and often fail independently.
Only one cavity works
On a double oven the two halves are largely separate. One dead cavity is usually its own element or relay, not the whole appliance.
Baking unevenly
Sensor drift, or a convection fan that has stopped moving air. Worth diagnosing before you start compensating with the dial.
Convection fan noisy or dead
Motor or bearing. It gets louder before it stops, so a new noise is worth a call.
Door locked after a self-clean
The latch motor didn't release. The oven is fine; the lock isn't.
Door glass shattered
Inner glass can go without warning. Replaceable, and the door comes apart to do it.
Hinges sagging
The door stops sitting square and heat escapes at the top. Hinges are replaceable in pairs.
Touch panel unresponsive
Control board or the ribbon behind it. We test the chain rather than replacing the most expensive part first.
Error code on the display
Read us the code when you call. On built-ins it often decides whether the oven has to come out at all.
All major wall oven form factors
Wall ovens are built into cabinetry rather than standing on the floor, so access is from the front and the cabinet opening sets the terms. Two configurations.
Single
One cavity built into a cabinet. Bake element, sensor and door hinges are the three things we replace most, and all three are reachable from the front.
Double
Two cavities stacked in one opening, sharing a control board. Worth telling us which cavity is affected when you call — upper and lower are different parts.
Wall oven brands we repair in Calgary
We service all major wall oven brands sold in Canada, including:
Wall oven repair cost in Calgary
Labour for most stove, oven and cooktop repairs typically falls in the $220–$350 range — whether it's parts replacement (heating element, temperature sensor, thermostat) or a labour-only fix (door alignment, hinge adjustment). Parts are quoted separately when needed.
Parts replacement or labour-only. Parts quoted separately when needed.
Applied toward repair if you proceed
Always disclosed before we start
Your firm quote comes from your tech after diagnosis, before any work begins. Full pricing details.
Strong hands, honest work.
Flat-Rate Pricing
You get a firm labour quote before we start. Parts shown separately on your invoice — no hidden fees, no hourly rates.
Insured & Warrantied
Every Kodiak job comes with liability insurance. Every part we install carries a 90-day warranty — the part and the labour to fit it. See what’s covered → Your home is protected — and so is the repair.
Ask us to look at your vent while we're there. If we're already in your home for any appliance repair, we'll inspect the dryer vent at no charge — it takes a couple of minutes and it's the cheapest problem in the house to catch early. Just ask when we arrive.
More Calgary repairs
What to expect when you book
Fill out the form or call us. We confirm your appointment and give you an arrival window.
We call ahead when on the way. Your tech arrives in the agreed 3-hour window.
We find the problem and give you a flat-rate quote — labour plus parts — before touching anything.
You approve, we fix it. Most repairs are done on the first visit. 90-day warranty on every part we install.
You pay exactly what was quoted. No hourly rates, no add-ons, no surprises.
Common questions
My oven isn't heating — is it the element or the control board?
Most of the time it's a bake or broil element — a relatively simple fix. Control board failures do happen but are less common. Our tech will diagnose on the first visit and quote before touching anything.
Do you repair glass-top (ceramic/induction) stoves?
Yes. We service glass-top ranges — burner issues, control panel faults, cracked glass assessment, and element problems beneath the surface.
My stove burner works but the oven doesn't — is that normal?
Yes, it's common. The burners and oven use separate heating elements and controls. An oven that doesn't heat while burners work fine usually points to the bake element or oven thermostat.
Do you service stoves and ovens?
Yes — we service ranges, wall ovens and cooktops. All major brands.
How long does a stove or oven repair take?
Most repairs are completed on the first visit. If a part needs to be ordered, we'll book a return visit as soon as it arrives.
Wall oven down? Let's fix it.
Kodiak covers Calgary and area. Send us the details, or call with a question — we pick up.
Honest, flat-rate appliance repair in Calgary and area. Run by a working tech who wants to do it right.